Audio Equipment and Home Theater Audio : Volume Control - Component
Re: Volume Control - Component
to my knowledge, there's no real easy way to do this. You need a program that has an Automatic Level Control or ALC.
You can run the audio through a small DJ mixer, which might be a little easier to work with.
I use a Teac A6300 reel to reel for volume balancing if it's needed.
You can run the audio through a small DJ mixer, which might be a little easier to work with.
I use a Teac A6300 reel to reel for volume balancing if it's needed.
Re: Volume Control - Component
What I would like is simply a device that I can run my audio component cables through that would allow me to adjust volume levels. It would also need a meter of some kind, LED or an old-school needle. That's it. I don't need equalization, although that would be a plus too. I'm not looking for a computer program.
Re: Volume Control - Component
Then the small DJ mixer is exactly what you are looking for. You feed the audio from the DVD through the mixer, then back to the comp.
Something like this.
http://www.ebay.com/itm/Radio-Shack-SSM-50-Stereo-Mixer-Used-/190681167769?pt=LH_DefaultDomain_0&hash=item2c657bb799
Something like this.
http://www.ebay.com/itm/Radio-Shack-SSM-50-Stereo-Mixer-Used-/190681167769?pt=LH_DefaultDomain_0&hash=item2c657bb799
Re: Volume Control - Component
Sweet. I think that would do it! Thanks.
Volume Control - Component
There's got to be an easier, cheaper way.
Thanks